Super Phobic 2X6 Series Membrane Contactor G638W, Polyolefin UP II, 1/Case

Super Phobic 2X6 Series Membrane Contactor G638W, Polyolefin UP II, 1/CaseThis Membrane Contactor is suitable for Durst Rho 350 series printers. This is the original 3M part (number G638W).Commonly used to removed bubbles and dissolved gases from liq..

  • Product Code: DIGI-6451
  • Availability: In Stock

$300.00

$500.00

Tags: 3M, SPAREPARTS

Super Phobic 2X6 Series Membrane Contactor G638W, Polyolefin UP II, 1/Case


This Membrane Contactor is suitable for Durst Rho 350 series printers. This is the original 3M part (number G638W).

Commonly used to removed bubbles and dissolved gases from liquids with low surface tensions, The 3M™ Liqui-Cel™ SP Series Membrane Contactors use a non-porous, gas-permeable hollow fiber. This membrane technology makes it possible to degas and debubble compatible solutions containing surfactants or organic solvents.

Many processes using liquids containing organic solvents and surfactants require degassing and bubble removal. Ink jet printers degas inks to prevent nozzle misfires and poor drop formation that could lead to printer downtime, maintenance and poor print quality. In ink production, SP series membrane contactors are installed in filling steps to help prevent foaming. Similar to ink jet printing, entrained air can negatively impact other production processes, such as processes using compatible monomers, paper coatings, photoresists, developers, emulsions and plating solutions by causing defects or process interruptions.

The SP series offers a simple, inline solution to help keep printers and production lines running. Products are available in a variety of materials to handle flow rates from as low as 5 ml/min to 30 gpm (6.8 m3/hr) in a single unit.

Membrane Characteristics:

  • Cartridge Configuration: No Baffle Radial Flow 
  • Liquid Flow Guidelines 100 ml/min – 1 liter/min (Liquid must flow on the shellside)
  • Membrane/Potting Material Polyolefin UP-II / Polyethylene
  • Typical Membrane Surface Area: 0.3 m2
  • Shellside: 77 ml


Housing Characteristics:

  • Material: Polyethylene
  • Shellside(Liquid Inlet/Outlet) : 1/4 inch NPT Female
  • Lumenside (vacuum) : 1/4 inch NPT Female
  • Weight: 140gr (Dry), 220g (liquid full)

 

Specifications

Brand
Liqui-Cel™
Filter Technology
Membrane
Filter Type
Gas Exchange
Industries
Industrial
Membrane Type
Polyolefin UP II
Overall Diameter (Imperial)
2 in
Overall Diameter (Metric)
51 mm, 51 mm
Overall Length (Imperial)
6 in
Overall Length (Metric)
152 mm
Series
Liqui-Cel™ SP Series


Compatible Printer :

Durst
  • Rho 350R-16
  • Rho 350R-8
SPG Prints
  • DSI 330

Write a review

Note: HTML is not translated!
    Bad           Good